Close
|
|
|
|
A simple bumper repair on a modern vehicle may not be as simple as it seems. New technologies like blind spot monitoring, adaptive cruise control, and other advanced driver assistance systems (ADAS) utilize sensors behind the bumper covers. The ability for these sensors to be able to see clearly, normally requires special caution when considering a bumper repair. Many OEMs have different levels of warnings when it comes to repairing bumper covers with ADAS. So, what does Porsche say on the subject?
What is a one-time-use part, and how do you determine if a fastener, clip, or part can be reused? These are questions that we are confronted with in the collision industry quite a lot. The other big question is "Where do I find this information?"
Porsche position statements can now be accessed directly from the I-CAR Repairability Technical Support (RTS) Portal.
I-CAR had a discussion on air conditioning repair considerations.
What is the MPa of the front lower rail? What is the outer uniside made of: steel, aluminum, or composite? Can heat be used to straighten or is it cold straightening only? What are the repair limitations? These are just some of the questions that the RTS team fields on a daily basis.
Sometimes, going back to the basics can make the difference between a quality repair and a failed repair. When performing damage analysis, do not overlook tire damage.
We’ve had technical inquiries that asked about Honda vehicles being equipped with dummy blind spot sensors.
When researching procedures for disabling a high-voltage (HV) vehicle, you may notice that many of the procedures require the use of specific tools. Some of them are OEM-specific tools or scan tools. Often identifying and locating where to purchase these specific tools can be difficult.
Changes in advanced driver assistance systems (ADAS) radar technology are introducing new refinishing considerations. We know that paint film thickness can affect the performance of ADAS radars, but color formula selection may also be a contributing factor. What resources do repairers have available? Let’s see what PPG has to offer.
Sometimes seeing is understanding, that’s why I-CAR's technical team created the Just in Time video series to guide you through a variety of collision repair topics from ADAS and EVs to repair tips and tricks. These videos enable you to, in less than 5 minutes, learn something new. Let’s check out what the team has for using a scuff wheel to remove plastic fuzz.
How do I replace a factory laser-welded roof on a Nissan Altima is a common question. Nissan released a procedure that explains their process, let’s take a look.
Sometimes seeing is understanding, that’s why I-CAR's technical team created the Just in Time video series to guide you through a variety of collision repair topics from ADAS and EVs to repair tips and tricks. These videos enable you to, in less than 5 minutes, learn something new. Let’s check out what the team has for protecting ultra-high-strength steel (UHSS) panels when removing spot welds.
Changes in advanced driver assistance systems (ADAS) radar technology are introducing new refinishing considerations. We know that paint film thickness can affect the performance of ADAS radars, but color formula selection may also be a contributing factor. What resources do repairers have available? Let’s see what Genesis has to say.
I-CAR had a discussion on variations in OEM service parts.
Sometimes, going back to the basics can make the difference between a quality repair and a failed repair. Refinishing defects can take many forms and be influenced by the technician, environment, product selection, or equipment maintenance to name a few. Let’s look at dirt nib inclusion during the refinishing processes.
